ACM (Aluminum Composite Material)
Rigid sign panel made of two thin aluminum sheets bonded to a polyethylene core (e.g., Dibond, Maxmetal); common in 3mm and 6mm thicknesses.
52 practical print, signage, apparel, display, and light fabrication estimating terms—each with a 1-click customer clarification question you can paste straight into any RFQ reply.
Rigid sign panel made of two thin aluminum sheets bonded to a polyethylene core (e.g., Dibond, Maxmetal); common in 3mm and 6mm thicknesses.
Interior wayfinding plaques meeting Americans with Disabilities Act specs for 1/32" raised copy, Grade 2 Braille beads, and non-glare contrast.
Off-site freight depot accepting trade show shipments 2–4 weeks early so crates are waiting inside the booth at load-in.
Electrochemical passivation process thickening the natural oxide layer on aluminum for durable metallic color and corrosion protection.
Fast-drying water-based clear press coating protecting offset sheets against scuffing and fingerprints.
Translucent polyester display textile engineered to diffuse internal LED ladder lighting evenly without hotspots.
Artwork extending 0.125" (3mm) beyond the final trim line on every edge so paper cutting leaves zero white slivers.
Economical vinyl rolled between heated cylinders; best for flat signage, short-to-medium term window decals, and interior graphics.
Thickness of a single paper sheet in thousandths of an inch (or pages per inch) used to calculate perfect-bound spine width.
Premium conformable vinyl film manufactured by pouring liquid plastisol onto a casting sheet; ideal for long-term vehicle wraps and compound curves.
Individually fabricated 3D metal/acrylic illuminated letters mounted to a raceway or flush against a building fascia.
Computer-controlled subtractive cutting of acrylic, aluminum, PVC, HDU foam, and plywood from vector DXF/STEP toolpaths.
Plotter-cut vinyl following the exact perimeter of a logo or shape; kiss-cut leaves backing liner intact, die-cut cuts through both.
Vector cut, crease, and perforation template overlaid as a non-printing spot color for folding cartons and custom sleeves.
Converting artwork into machine-readable embroidery stitch paths, stitch directions, underlay, and pull compensation.
Water-based ink with an activating agent that strips dye from 100% cotton fibers for a soft, zero-hand feel.
Mandatory show-floor freight handling fee charged by the convention general contractor to move crates from loading dock to booth.
Full-color digital transfer printed onto PET film, dusted with hot-melt adhesive powder, cured, and heat-pressed onto garments.
Heat-transfer printing process that turns disperse dyes into gas, bonding directly into polyester display fabrics for wrinkle-resistant color.
Larger garment blank sizes that carry higher wholesale blank costs and separate line-item pricing.
Brief infrared heat pass between print stations to gel an ink layer (such as a white underbase) before printing subsequent colors.
Margin is profit divided by sell price; markup is profit divided by cost. A 50% markup equals a 33.3% gross margin.
Paper density measures: metric grams per square meter (GSM) vs. US pound weight of 500 uncut parent sheets (Text vs. Cover weights differ).
Pattern of variable-sized dots simulating smooth gradients or photographic shading using a limited number of spot ink screens.
Reinforced folded banner perimeter (heat-welded or banner-taped) with brass/nickel metal rings spaced every 24" for hanging.
Inline booths sit between neighboring exhibitors (typically 8ft backwall height limit); island booths are open on all four aisles with taller rigging allowances.
Width of material removed by a laser beam, CNC router bit, waterjet, or saw blade; must be accounted for in sheet nesting.
Press or machine setup time, test sheets, and calibration labor required before the first salable piece is produced.
Number of threads per inch in a screen printing mesh (e.g., 110 mesh for thick underbases/puff ink, 230–305 mesh for fine halftones).
Clear protective film (matte, satin, or gloss) applied over wide-format prints to prevent abrasion, chemical wear, and UV fading.
Adhesive vinyl punched with micro-holes (typically 60/40 or 70/30 print-to-hole ratio) allowing one-way visibility from inside storefronts or vehicles.
PVC-based screen printing ink that sits on top of fabric and requires ~320°F conveyor curing; durable and opaque.
Individually folding and bagging decorated garments by size for retail fulfillment or multi-location distribution.
Electrostatic dry polymer finish baked in a curing oven for superior chip, weather, and corrosion resistance over wet paint.
Foaming agent mixed into plastisol ink that expands during curing to create a raised 3D texture.
Square-spine adhesive binding using polyurethane reactive glue for thick catalogs and lay-flat durability.
Rectangular aluminum housing behind channel letters that conceals transformers and wiring, reducing wall penetrations.
Printing replacement fabric or vinyl panels sized to fit a customer's existing hardware frame.
Spring-loaded aluminum base housing a roll-up graphic panel (typically 33"×80") for fast single-person setup.
Booklet binding using folded sheets nested together and wire-stapled along the spine; requires page counts divisible by 4.
Inner boundary (usually 0.25" inside trim) keeping logos and text safe from cutting variance.
Dye-sublimated tension fabric printed with a thin silicone bead sewn along the perimeter that tucks tightly into aluminum extrusion frames.
Standardized metal thickness scale where lower gauge numbers indicate thicker sheet metal (e.g., 14ga steel is thicker than 20ga).
On-site measurement and photo audit verifying fascia substrate, electrical stub-outs, ladder/lift clearance, and municipal sign codes.
Velvety matte polypropylene film laminated onto covers or packaging for a premium tactile finish.
Machined aluminum or stainless barrels that float rigid acrylic or metal plaques 0.5"–1.5" off a wall.
Total number of needle penetrations in an embroidery design; primary driver of run time and embroidery pricing.
Permissible dimensional deviation (e.g., ±0.015") on fabricated parts; tighter tolerances increase setup and machine time.
Final finished width × height of a printed brochure, card, or booklet after guillotine cutting.
Base layer of white plastisol ink printed beneath colored inks on dark garments so top colors stay vibrant and opaque.
Manually removing excess vinyl around plotter-cut letters before applying transfer tape.
Curved cuts in exterior mesh or vinyl banners intended to reduce wind load; 8oz–9oz mesh banner is generally preferred over slits.