ACM (Aluminum Composite Material)
Rigid sign panel made of two thin aluminum sheets bonded to a polyethylene core (e.g., Dibond, Maxmetal); common in 3mm and 6mm thicknesses.
52 practical terms every sign, apparel, exhibit, print, and custom fabrication estimator runs into on incoming customer RFQs.
Rigid sign panel made of two thin aluminum sheets bonded to a polyethylene core (e.g., Dibond, Maxmetal); common in 3mm and 6mm thicknesses.
Premium conformable vinyl film manufactured by pouring liquid plastisol onto a casting sheet; ideal for long-term vehicle wraps and compound curves.
Economical vinyl rolled between heated cylinders; best for flat signage, short-to-medium term window decals, and interior graphics.
Adhesive vinyl punched with micro-holes (typically 60/40 or 70/30 print-to-hole ratio) allowing one-way visibility from inside storefronts or vehicles.
Individually fabricated 3D metal/acrylic illuminated letters mounted to a raceway or flush against a building fascia.
Rectangular aluminum housing behind channel letters that conceals transformers and wiring, reducing wall penetrations.
Plotter-cut vinyl following the exact perimeter of a logo or shape; kiss-cut leaves backing liner intact, die-cut cuts through both.
Clear protective film (matte, satin, or gloss) applied over wide-format prints to prevent abrasion, chemical wear, and UV fading.
Reinforced folded banner perimeter (heat-welded or banner-taped) with brass/nickel metal rings spaced every 24" for hanging.
Curved cuts in exterior mesh or vinyl banners intended to reduce wind load; 8oz–9oz mesh banner is generally preferred over slits.
Manually removing excess vinyl around plotter-cut letters before applying transfer tape.
On-site measurement and photo audit verifying fascia substrate, electrical stub-outs, ladder/lift clearance, and municipal sign codes.
Base layer of white plastisol ink printed beneath colored inks on dark garments so top colors stay vibrant and opaque.
Brief infrared heat pass between print stations to gel an ink layer (such as a white underbase) before printing subsequent colors.
Number of threads per inch in a screen printing mesh (e.g., 110 mesh for thick underbases/puff ink, 230–305 mesh for fine halftones).
Pattern of variable-sized dots simulating smooth gradients or photographic shading using a limited number of spot ink screens.
Water-based ink with an activating agent that strips dye from 100% cotton fibers for a soft, zero-hand feel.
PVC-based screen printing ink that sits on top of fabric and requires ~320°F conveyor curing; durable and opaque.
Full-color digital transfer printed onto PET film, dusted with hot-melt adhesive powder, cured, and heat-pressed onto garments.
Converting artwork into machine-readable embroidery stitch paths, stitch directions, underlay, and pull compensation.
Total number of needle penetrations in an embroidery design; primary driver of run time and embroidery pricing.
Foaming agent mixed into plastisol ink that expands during curing to create a raised 3D texture.
Larger garment blank sizes that carry higher wholesale blank costs and separate line-item pricing.
Individually folding and bagging decorated garments by size for retail fulfillment or multi-location distribution.
Dye-sublimated tension fabric printed with a thin silicone bead sewn along the perimeter that tucks tightly into aluminum extrusion frames.
Heat-transfer printing process that turns disperse dyes into gas, bonding directly into polyester display fabrics for wrinkle-resistant color.
Inline booths sit between neighboring exhibitors (typically 8ft backwall height limit); island booths are open on all four aisles with taller rigging allowances.
Mandatory show-floor freight handling fee charged by the convention general contractor to move crates from loading dock to booth.
Off-site freight depot accepting trade show shipments 2–4 weeks early so crates are waiting inside the booth at load-in.
Spring-loaded aluminum base housing a roll-up graphic panel (typically 33"×80") for fast single-person setup.
Translucent polyester display textile engineered to diffuse internal LED ladder lighting evenly without hotspots.
Printing replacement fabric or vinyl panels sized to fit a customer's existing hardware frame.
Width of material removed by a laser beam, CNC router bit, waterjet, or saw blade; must be accounted for in sheet nesting.
Standardized metal thickness scale where lower gauge numbers indicate thicker sheet metal (e.g., 14ga steel is thicker than 20ga).
Electrostatic dry polymer finish baked in a curing oven for superior chip, weather, and corrosion resistance over wet paint.
Electrochemical passivation process thickening the natural oxide layer on aluminum for durable metallic color and corrosion protection.
Computer-controlled subtractive cutting of acrylic, aluminum, PVC, HDU foam, and plywood from vector DXF/STEP toolpaths.
Machined aluminum or stainless barrels that float rigid acrylic or metal plaques 0.5"–1.5" off a wall.
Interior wayfinding plaques meeting Americans with Disabilities Act specs for 1/32" raised copy, Grade 2 Braille beads, and non-glare contrast.
Permissible dimensional deviation (e.g., ±0.015") on fabricated parts; tighter tolerances increase setup and machine time.
Artwork extending 0.125" (3mm) beyond the final trim line on every edge so paper cutting leaves zero white slivers.
Final finished width × height of a printed brochure, card, or booklet after guillotine cutting.
Inner boundary (usually 0.25" inside trim) keeping logos and text safe from cutting variance.
Thickness of a single paper sheet in thousandths of an inch (or pages per inch) used to calculate perfect-bound spine width.
Paper density measures: metric grams per square meter (GSM) vs. US pound weight of 500 uncut parent sheets (Text vs. Cover weights differ).
Booklet binding using folded sheets nested together and wire-stapled along the spine; requires page counts divisible by 4.
Square-spine adhesive binding using polyurethane reactive glue for thick catalogs and lay-flat durability.
Fast-drying water-based clear press coating protecting offset sheets against scuffing and fingerprints.
Velvety matte polypropylene film laminated onto covers or packaging for a premium tactile finish.
Vector cut, crease, and perforation template overlaid as a non-printing spot color for folding cartons and custom sleeves.
Margin is profit divided by sell price; markup is profit divided by cost. A 50% markup equals a 33.3% gross margin.
Press or machine setup time, test sheets, and calibration labor required before the first salable piece is produced.